kawartha-hardware

How to Match Replacement Drawer Slides in Peterborough, Plus Hinges and Pulls

Fri, 09 Oct 2026 09:25:35 GMT

When a drawer starts dragging or a cabinet door won't close flush anymore, the cabinet itself is often fine and it's the hardware that has worn. A replacement that drops straight in mounts the way the original did, and the old part shows how, so it's worth taking off and bringing in with you.

Kawartha Hardware Distributors specializes in cabinet hardware. At our shop on Neal Drive in Peterborough we stock drawer slides and cabinet hinges, inset hinges included, plus pulls, knobs, screws and fasteners from several suppliers. Non stock items can be ordered, and if we don't have it, we will get it if it's available to us.

Which Drawer Slides Will Fit an Existing Drawer?

Replacement drawer slides need to mount in the same spot as the old ones and run the same length. Pull the drawer out, or lift it off if it releases, and the mounting will usually look like one of these.

Side mount, a pair of slides with one screwed to each side of the drawer box and the matching rail inside the cabinet. Plenty of them run on ball bearings.
Undermount slides are hidden beneath the drawer, so there's no metal along the sides when it's open.
Bottom mount rollers along the lower edge of each drawer side, with a wheel at the back of the drawer piece and another at the front of the cabinet piece
A single centre runner, common in older cabinetry, fastened at the front and back of the cabinet with a guide on the drawer that rides along it.

For length, the old slide is your measurement. Side mount slides also depend on a set gap between the drawer box and the opening on each side, so changing to another style can mean rebuilding the drawer to suit it.

Why does a drawer drag or drop when it's pulled out?

Often it's the drawer slide, from worn bearings or a rail that's bent or worked loose. Before replacing anything, check the mounting screws, because a rail that's backed off slightly drops a drawer much like a worn slide does. Stripped holes in particleboard will often hold again with a slightly larger screw that still fits the slide's mounting holes, or with the rail moved to a fresh spot in solid material, and we stock screws and fasteners if you need them.

Do Your Cabinets Need Inset Hinges or Overlay Hinges?

Look at a closed door. If it sits inside the opening with a thin line of frame or cabinet edge showing all the way around, it's an inset door and needs inset hinges. An overlay door sits on the front of the cabinet instead, covering part or nearly all of the edge, and since the two kinds of hinge are bent differently to put the door where it belongs, they don't swap.

Overlay varies between kitchens too, because how much of the edge a door covers depends on the hinge arm and its mounting plate working together. Frameless and face frame cabinets take different plates as well, so one old hinge brought in with its plate, if it has one, still on settles both questions.

We specialize in hard-to-find pieces, and inset cabinet hinges are one of them. If the hinges on your doors are visible from the outside, switching to concealed ones means boring a cup into the back of each door. Our Quick Order Doors page covers replacing doors and drawer fronts and moving to concealed hinges at the same time.

Can a crooked cabinet door be fixed without a new hinge?

In a lot of cases, yes. Most concealed hinges have adjustment screws on the arm for moving the door sideways and in or out, many adjust for height too, and a door that droops or rubs its neighbour can usually be brought back into line with a screwdriver. Replace the hinge once the arm cracks or the closing spring gives out.

How Do You Replace Cabinet Pulls Without Drilling New Holes?

Choose a pull with the same centre to centre spacing as the old one, measured from the middle of one screw hole to the middle of the other, and it'll go straight onto the existing holes. Pulls are often listed in millimetres, so write the spacing down in metric as well as inches, or bring one of the old pulls along.

Thickness matters as well. Pulls ship with screws cut to a set length, and a thick drawer front, or a decorative front screwed onto the drawer box, can need a longer one than the package includes. We carry screws and fasteners, so ask about the length while you're choosing pulls.

Changing from a knob to a pull, or to a different spacing, leaves a hole showing, and a backplate behind the new hardware is a common way to cover it without filling and refinishing the door. We have tons of affordable replacement cabinet pulls and knobs that will refresh your cabinets. If a door is hanging crooked, sort the hinge out too, since pulls only line up across a row once the doors do.

What to Bring to Kawartha Hardware

The old part is the best reference there is. Bring one complete slide, with the drawer piece and cabinet piece together, or a single hinge with its plate still on, and for pulls, bring an old one or jot its spacing on a scrap of paper. A phone photo of the cabinet with the door closed and the drawer pulled out fills in whatever the parts can't show.

If the part looks unusual, bring it anyway. We carry many things that other hardware retailers can't be bothered stocking, and if you need that 'thingy' that no one else can find, let us see what we have hiding in the back. With a drawer emptied out, it's also a fair moment to look at the kitchen cabinet accessories that go inside, whether that's a utensil divider for the drawer or a garbage and recycling pullout for a base cabinet.

Getting the Right Drawer Slides in Peterborough

Kawartha Hardware Distributors is at 600 Neal Drive in Peterborough, open to the public, and we serve contractors and retail customers alike. We're not a 'Big Box' store, and frankly, we feel this is our strength. Customer service here is not a game of hide and seek.

Bring the old drawer slide in, or contact us with your measurements first. With a matching slide fitted, the drawer should run out and close again without a scrape.

Cabinet Door Styles in Peterborough: How to Choose Between Wood and White

Tue, 11 Aug 2026 05:53:33 GMT

Painted white suits kitchens where you want the cabinetry to stay quiet, letting the counters, backsplash, and hardware carry the interest. Wood suits kitchens where you want visible grain, warmth, and a surface that holds its character through years of daily use. Settle that one first. It narrows the profiles worth looking at, and it decides whether you are matching a paint colour or matching a grain.

The room usually decides it for you. Look at how much natural light gets in, what colour the counters already are, and whether the cabinets run floor to ceiling or stop short at a window.

At Kawartha Hardware Distributors, we help homeowners, contractors, and designers in Peterborough work through exactly this choice. If your cabinet boxes are still in great condition and only the doors and drawer fronts have aged out of the look you want, replacing just those is an economical, budget friendly way to refresh the space without the cost of a full remodel. Affordable kitchen doors go on, and the boxes stay exactly where they are.

Which Cabinet Door Styles Should You Look At First?

Among cabinet door styles, shaker and slab are the two our own door examples start with. Shaker has a recessed centre panel inside a flat frame, which throws a shadow line around all four edges. Slab has no profile at all, so the face sits flush and the eye moves across a run of cabinetry rather than stopping at every door.

Shaker doors get built two ways across the industry. A one piece shaker door is milled from a single piece of material, so the frame and the panel are one continuous surface with no joints anywhere in the face. A five piece door is assembled from two stiles, two rails, and a centre panel. From across the room they read almost identically, but the one piece version has no rail to stile seam, which is a large part of why it takes a painted finish so evenly. Our Shaker 1 piece in New York White is a clean example of how that plays out on a white door.

Each one does something different:

Shaker gives you a framed centre panel and a defined edge, adding structure without committing the kitchen to a period look.
Slab is a flat, uninterrupted face. It wipes down in one pass and lets a wood grain or a strong colour carry the room on its own.

Available styles and colours shift over time, so ask about the profile you have your eye on rather than assuming. Affordable cabinet doors in Peterborough still come in wood, in white, and in a range of other colours and designs. Ours are made to order, and if a piece is not on the shelf and it is available to us, we will do our best to source it.

Wood or Painted White: Which Cabinet Doors Suit Your Kitchen?

Go painted white when a kitchen needs more light, when you want a full run of cabinetry to read as one clean surface, or when your existing boxes are already white and you are replacing doors to match them. Go wood when the room has decent natural light to begin with, when you want warmth working against cool counters or tile, or when you would rather the cabinetry be the feature than the background.

Both finishes hold up well in a working kitchen. They just wear in different places. Painted doors show handling around the pulls, which is one good reason a well placed pull or knob earns its keep. Cabinet doors in wood carry small marks more gracefully, because the grain absorbs them into the pattern, and they usually warm a shade in tone as they age.

Solid wood also moves with the seasons. When indoor air dries out over a Peterborough winter, the centre panel on any five piece door contracts a fraction and can show a hairline at the panel edge. The panel expands again as humidity comes back up in the summer, and the line closes. A one piece door in a painted finish has no panel edge to open up, so the face stays uniform year round.

Painting your existing doors instead of replacing them brings grain into the decision. Open grain species like oak telegraph their texture straight through paint, so a painted oak door still reads as oak from close up. When a smooth painted finish is the goal, a new door already finished that way gets you there more directly than filling and levelling the old one.

Should You Replace the Doors Only, or Paint the Boxes Too?

Two paths cover almost every do it yourself refacing project in Peterborough. Look at the colour of your existing cabinet boxes to work out which one applies to you.

Replace the cabinet doors only. This works especially well when your existing cabinet boxes are already white. Say the boxes are in good shape but the doors and drawer fronts are damaged or outdated. Swap in a new style in white, move to concealed hinges, and the cabinetry is transformed without touching the boxes at all. The Shaker 1 piece in New York White is a natural fit here.
Paint the boxes and add new doors. Plenty of kitchens have cabinets built from high quality materials that simply need sprucing up. This is the route to take when your new door selection is a solid colour, which is often the case once raised panel cabinets in golden oak have run their course. Take a colour swatch to the paint department, prime and paint the boxes, and they will match your new painted shaker doors. New cabinet pulls on top of that give the whole thing a fresh accent.

Either way, plan on new hinges. Concealed hinges mount inside the cabinet and disappear the moment the door closes, and matching the hinge to the door and the overlay is what makes everything sit level and close cleanly. Ask about boring when you order so the door and the hinge get specified together.

What Else Do You Need When You Replace Cabinet Doors?

When you replace cabinet doors, the short list beyond hinges is pulls or knobs. Add drawer slides if the drawer boxes are getting refreshed at the same time. Our Peterborough shop stocks cabinet hinges including inset, drawer slides, cabinet pulls and knobs, along with the specialty kitchen cabinet accessories that finish a job properly, from garbage and recycling pullouts to utensil dividers, screws, and fasteners. We are a Festool and Kreg dealer too, so ask if you need tools for the install.

Centre to centre spacing is the measurement that decides whether a pull lines up with holes already drilled in a door. Because you are fitting brand new doors, this is the single moment in the project where you can change pull size freely without patching a thing. Switching from knobs to pulls, or the other way around, will never be less work than it is right now.

Cabinet Door Questions We Hear at Kawartha Hardware

Can you replace cabinet doors without replacing the cabinets?

Yes. When the boxes are still in great condition, replacing only the doors and drawer fronts refreshes the kitchen without the cost of a full remodel. Quick order cabinet doors exist for exactly this DIY job.

What is a one piece shaker cabinet door?

It is a shaker door milled from a single piece of material rather than assembled from separate stiles, rails, and a centre panel. Because the face has no joints in it, the door takes a painted finish very evenly.

Do cabinet doors come in both wood and white?

They do, along with many other colours and designs. Cabinet doors in wood suit kitchens where you want grain and warmth on show. Cabinet doors in white suit kitchens where brightness and a uniform run of cabinetry are the goal.

What happens if the door style you want is not in stock?

Non stock items can be ordered. Our cabinet doors are made to order in the first place, and for anything else, if we do not have it on hand and it is available to us, we will get it.

Do you need new hinges when you replace cabinet doors?

In most cases, yes. The hinge has to suit both the door and the overlay for the doors to hang level, so settle the hinge and the door together rather than separately. We stock cabinet hinges in Peterborough, inset included.

How do you measure for replacement cabinet doors?

Our Quick Order Doors page has a How To Guide and an order form you can download, along with a how to video. Fill out what you can before you visit and we can work from your numbers.

Quick Order Cabinet Doors in Peterborough

Bring a photo of your kitchen and a rough measurement or two, and we can narrow the cabinet door styles down quickly. Kawartha Hardware Distributors is open to the public at 600 Neal Drive in Peterborough, and we would far rather answer twenty questions up front than leave you guessing at any of it. Contact us or come see the doors and hardware in person.

You should be able to leave with your door style chosen, your finish settled, your hinges and pulls sorted, and a completed order form in hand.